‘FloorPack’

Underfloor Heating Packs

‘FloorPack’ is available in standard sizes for next day delivery or can be made to order to any size to suit your specification, priced according to floor plans.

Each pack includes components to provide underfloor heating to screeded floor areas up to 18m², 27m², 36m², 45m², 54m², 63m² & 72m².

‘FloorPack’ Includes

Suitable amount of 16 or 18mm Easi-fit Pipe. Pert-Al-Pert is form-stable for ease of installation and has a complete oxygen barrier. Easi-fit Pipe is approved to DIN standard for a minimum of a 50 year period.

3 Port mixing valve.

Circulating pump with valves.

TPS Programmable room thermostat.

Pipe clips (For fixing to insulation).

Pipe cutter and reamer.

Installation guide & wiring instructions.

Manifold assembly (27, 36, 45, 54, 63 & 72m² kits only).

Typical manifold assembly

Small, compact, temperature controlled, pre-assembled pumping unit for any FloorPack system

The above kits are single zone (or room) applications. Additional zones can be added with larger kits, prices are available on request.

If independent control is required the system must be piped directly to heat source. If installation guide is required please let us know or visit our web-site.

About FloorPack

Ideal for apartments, larger conservatories and extensions. Provides underfloor heating to screeded floors; 18m2, 27m2, 36m2, 45m2, 54m2, 63m2 & 72m2. Larger kits - on request. Quotation based on floor plans. FloorPack includes: Easi-fit pipe, cutter, reamer & clips. Manifold assembly, mixing valve, circulating pump, TPS, installation guide & wiring instructions. Available for next day delivery. A programmable room thermostat is used to turn the pump on/off according to actual heat demand to maintain programmed room temps. The thermostatic controlled mixing arrangement ensures a low flow temp of the water entering the UFH circuit. Maintains programmed room temperatures, including night set-back. Secure low temperature water to the circuit Ensures high flow rate in floor heating circuit Does not rely on the pump in the existing heating system CAD’s are available if requested - at a small additional cost. CAD drawing showing Easi-fit pipe layout for a typical office with kitchen and WC. Length of pipe required is calculated from plans to give an accurate quotation and FloorPack size needed.